Used to trim pour hole waste, remove mold marks, carve and sculpt ceramics and greenware. F97 has a hard tempered steel blade with the same "springy" feel as most conventional blades. The F96 is a softer steel blade, with much more flexibility which allows it to bend. Both blades are 4" long and firmly set in a hardwood handle for a total length of 8".
Used to trim pour hole waste, remove mold marks, carve and sculpt ceramics and greenware. F97 has a hard tempered steel blade with the same "springy" feel as most conventional blades. The F96 is a softer steel blade, with much more flexibility which allows it to bend. Both blades are 4" long and firmly set in a hardwood handle for a total length of 8".
This tool has a deep cleaner for smoothing the inside bottom of large vessels as well as a small blade for cleanup. The blades are made from stainless steel, making this tool 8-1/2" total in length.
This special teardrop shaped foot, flat on the bottom, is perfect for pressing lace in place, in addition to the fine, sharp needle for placement. The foot is stainless steel with a hardwood handle for a total length of 6-3/4".
This heavy blunt needle for placement of the lace as well as a special teardrop shaped foot, flat on the bottom for pressing lace in place. The foot is stainless steel with a hardwood handle for a total length of 6-3/4"
This tool has a fine, sharp needle used for the placement of the lace as well as a blade curved with a point for pressing and cleanup. The blade is stainless steel with a hardwood handle for a total length of 6-3/4".
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
Used for modeling in soft clay, cleaning seam lines, cutting and restoring detail. This unfinished all-wood tool has a sharp point at one end, a flat and square on the other, and 7-1/2" total in length.
Use both blades for smoothing those hard to reach areas of your pieces as well as trimming and cleanup. Blades are made from stainless steel, making this tool 8-1/2" total in length.
Ideal for enlarging holes that have become filled with glaze or cutting through difficult surfaces such as glaze, bisque, and tile. The remarkably tough steel rod is coated with Tungsten Carbide particles and set firmly in a hardwood handle for a total length of 6".
The COR has a thin double-edged steel blade for thin- walled and delicate work. Blade is double-edged to permit reverse cuts and steady control of the tools. (Sold in package).
It cleans it all! Use the large end for cleaning large hole and vase openings, and the small end for the small, delicate areas in greenware, such as openings in figurines, teacup handles, lace patterns, and more. Use this brush (or Spoolie) to clean your own brushes, and the Fluid Writer wells.
The set contains five of the most popular DS Series tools (D1, D2, D3, D7, D10). These 6", .035 diameter wire end tools provide the potter and sculptor with a series of shapes designed for light cutting and slicing as well as removing controlled amounts and shapes of clay. Diameter of balls on each end: 0.045" and 0.072"
The set contains five of the most popular DS Series tools (D1, D2, D3, D7, D10). These 6", .035 diameter wire end tools provide the potter and sculptor with a series of shapes designed for light cutting and slicing as well as removing controlled amounts and shapes of clay. Diameter of balls on each end: 0.072" and 0.114"
The set contains five of the most popular DS Series tools (D1, D2, D3, D7, D10). These 6", .035 diameter wire end tools provide the potter and sculptor with a series of shapes designed for light cutting and slicing as well as removing controlled amounts and shapes of clay. Diameter of balls on each end: 0.030" and 0.045"
These tools were designed for drilling holes in greenware by hand. The DR2 is a high carbon drill, DR4 is a cold rolled drill, and the DR6 is a #60 high speed drill. DR2 = 3/16" or 4.88 mm drill tool
These tools were designed for drilling holes in greenware by hand. The DR2 is a high carbon drill, DR4 is a cold rolled drill, and the DR6 is a #60 high speed drill. DR4 = 1/4" or 6.4 mm drill tool
A necessity for all potters, this 1-15/16" long, thin heat-treated steel needle makes a clean smooth cut with a minimum of drag when removing the uneven top edge of thrown items.
Designed for smoothing recessed flay spaces on wet greenware. It is also excellent for cutting clay away from and accentuating raised designs. The blades are stainless steel with a hardwood handle for a total length of 6".
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
Designed especially for delicately detailed incising and excising work, this tool has been used as a lace draping and cleanup tool as well. The sharp needle is set firmly in one end, with a steel spear-shaped blade on the other. With a smooth hardwood handle, this tool is a total length of 6 1/2".
Designed for cleaning and sharping the delicate fingers and toes of porcelain greenware figurines. Slightly longer than the detail carving tools, this blade is also formed and precision ground to a sharp point. (packaged in a plastic tube)
The spearhead was designed to provide sharp smooth cuts for incising, excising, widening, and deepening detail work..The forked-end-twin-line works well for hairlines, wood grain and basket weave sgraffito effects in limited access areas. This tool has stainless steel blades with a total length of 6".
These special blades will cut in any direction that pressure is applied. The high carbon steel saw is firmly set into a hardwood handle for a total length of 5-3/8". The K32 is a heavy duty saw used for cutting out designs in thick-walled greenware.
These special blades will cut in any direction that pressure is applied. The high carbon steel saw is firmly set into a hardwood handle for a total length of 5-3/8". The K32 is a heavy duty saw used for cutting out designs in thick-walled greenware.
Cut through and remove the uneven top edge of wheel- thrown items. The large 1-15/16" (49mm) long, sharp, heat-treated steel needle is set in a 1/2" diameter hard- wood handle for a sturdy grip.
Used to cut heavy clay strips, designs, and holes, this tool is used with many art mediums for a wide variety of uses - too many to name! This 6-5/8" long tool has a sharp steel needle and is firmly set in a textured aluminum handle providing a firm grip for wet hands.
For jobs where slim and sharp count. This tool is used to trim clay and to cut out designs. This semi-flexible blade is keenly sharpened for a smooth cut. The stainless steel blade is firmly set in a smooth hardwood handle for a total length of 5".
a simple, small tool used to create the small, often round, air hole in pottery whistles. It's a quick way to add a necessary component for producing a whistle sound.
Ideal for fine cuts on greenware, leather work, stenciling and more. This all purpose cutting tool has interchangeable parts with other, standard, utility knives. The surgically sharp blade is held firmly with a four-jaw chuck, releasable, handle. This knife has a textured aluminum handle for a sure grip with wet hands.
Originally designed for separating fingers and toes. These handy little tools are capable of fine detail work in tight area. Precision hardened steel burr tips are embedded in smooth hardwood handles.
Hand-Forged Scraper Tool (Double-Ended) Professional Series This double-end tool has fine serrated teeth on one end and coarse teeth on the other. It is made from high-grade stainless steel and hand-forged to create a solid unbreakable tool. Set in bright-colored rubber for comfort and secure gripping, it is fun to use, easy to find and won’t roll off the table. It is great for cutting, slicing, scoring, scraping, texturing, refining, shaping and removing clay.
Sgraffito & Detailing Set (Double-Ended) Professional Series The seven most practical and versatile tools for your sgrafitto and detailing needs. Each tool is made from solid piece of high-grade stainless steel and hand crafted in a variety of popular shapes with a precise cutting edge. With a rubber handle for a comfortable, secure grip, these tools are also great for intricate carving, cutting, and refining of detail. Set contains: 7 tools
Hand-Forged Needle and Scoring Tool (Double-Ended) Professional Series Two tools in one! Each tool is made from high-grade stainless steel and hand-forged to create a solid tool with a sharp needle in one end and a scoring tool on other end. Set in bright color rubber for a comfortable, secure grip, they are fun to use, easy to find and won’t roll off the table. They are also great for cutting, scoring, removing clay and all your hand-building needs. Since there are no glued or assembled parts, these tools made for life.