Wedgit! 36" Table with bottom shelf

These very strong wedging tables provide the perfect wedging surface with storage below. Frame is 14-gauge American steel with baked-on powder coat finish far tougher than any paint. Table tops are...

Medium Solid Coils 1/2", 9/16", 5/8", 11/16"

Shaped Coils 1/2" square, 5/8" Hex, 3/4" & 1" Ribbons

24" Std Pkg Bottom Shelf

HIGH DESIGN & GREAT ADVANTAGES Capacity 300 lbs 3/4" Thick High Pressure Melamine Coated Shelf Powder Coated Finished Supports

North Star Expansion Box pkg

INCLUDES: The expansion box, die retainer ring and mounting bolts, hex wrench, three piece spacer board and hardware PLUS 6" Medium Basic Die Set & die brace The Expansion Box is an extruder...

Glaze Test Die

Tile Strap Die

Yields a ribbon ¼” thick x 4¼” wide which can easily be cut into very uniform tiles.

Tile Trim Die Set

Basic Die Set

Set includes: Blank Die 915B - Small Solid Coils 1/4", 5/16", 3/8", 7/16" 915C - Medium Solid Coils 1/2", 9/16", 5/8", 11/16" 915D - Shaped Coils 1/2" square, 5/8" Hex, 3/4" & 1" Ribbons 925DM -...

Braided Rope Handle Dies

Set includes: DS10A - 1/4" Braid DS10B - 3/8" Braid DS10C - 1/2" Braid

Double Rope Handle Dies

Set includes: DS8A - 1" Handle DS8B -1 1/4" Handle DS8C - 1 7/8" Handle  

Triple Rope Handle Dies

Set includes: DS7A - 1 1/8" Wide x 3/8" Tall - Triple Rope Handle DS7B -1 3/8" Wide x 11/16" Tall - Triple Rope Handle DS7C - 1 9/16" Wide x 3/4" Tall - Triple Rope Handle  

Coil Builder Die Set

Set includes: DS6A - 1/2" Outside Diameter Semi-Round DS6B - 5/8" Outside Diameter Semi-Round DS6C - 3/4" Outside Diameter Semi-Round DS6D - 7/8" Outside Diameter Semi-Round DS6E - 1" Outside...

Single Blank Die

The 4" extruder dies are made of 1/2" HDPE (High Density polyethylene), which is extremely wear-resistant and completely non-contaminating. The top edge of the die cavity is beveled to compact the...

Baguette Tray - 928

Makes a small, footed tray about four inches wide, suitable for many uses on the dining table or dresser. 

Big Blue Extruder

  HIGH DESIGN & GREAT ADVANTAGES   The Simplest, Safest Extruders One Year Warranty Wagon Wheel Handle  The barrel and die simply lift out as a unit (no tools required) so that...

BB Tray Die Set

Set includes: 994A - 4" Tray Die 994B - 3" Tray Die 994C - 2" Tray Die

BB Large Footed Tray Die

9826- 6" Large Footed Tray Die

BB Solid Tile Die - 6

9827- 5" Wide by 3/8" Thick Tile w/ Thin-Set groves on back side

BB Solid Tile Setter Die

9825- 6" Tile Setter Die

BB Solid Coil Die Set

Set includes: 981A - 1 3/4" Solid Coil Die 981B - 1 1/4" Solid Coil Die 981C - 3/4" Solid Coil Die  

BB Blank Die Set (3)

980- 6" Blank Die, Set Of 3

BB Small Basic Die Set

BB Medium Basic Die Set

BB Large Basic Die Set

Set includes: 992A Round: 4 1/2" OD hollow 992B Square: 4 1/2" OD hollow 992C Hex: 4 1/2" OD hollow

BB Die Adapter Plate

982- 6" to 4" Die Adapter Allows use of 4" Dies with Big Blue Extruder & 4" Extruder Expansion Box

BB Tile Accessory - 3 Pc

Set includes: 997A - 2" Inside Corner Tile Die 997B - 2" Outside Corner Tile Die 997C - 2" Edge Trim Tile Die  

BB Oval Die - 3 Pc

Set includes: 996A - 5" Oval Die 996B - 4" Oval Die 996C - 3" Oval Die  

BB Half Round Die - 3 Pc

995A - 4 1/2" Half Round Die995B - 3 1/2" Half Round Die995C - 2 1/2" Half Round Die

Big Blue 4.5 Hollow Square Die

992B Square: 4-1/2" OD hollow

North Star Stainless Steel Extruder Expanded Pkg

Includes Stainless Steel Extruder w/Basic Die Set #915 & Expansion Box Package w/ Medium Basic Die Set #991 Basic Die Set Blank Die 915B - Small Solid Coils 1/4", 5/16", 3/8", 7/16" 915C -...

Studio Work Table w/ Bottom Shelf

These very strong wedging tables provide the perfect wedging surface with storage below. Frame is 14-gauge American steel with baked-on powder coat finish far tougher than any paint. Table tops are...

Wedgit! 30" Table with bottom shelf

These very strong wedging tables provide the perfect wedging surface with storage below. Frame is 14-gauge American steel with baked-on powder coat finish far tougher than any paint. Table tops are...

North Star Stainless Steel Extruder Pkg

One of David Sturm's top 5 favorites! Here are the simplest, safest extruders available for small to medium extrusions - the kind most of us do most of the time. They have proved their utility and...

Accessory Die Set

Extrudes 1” solid octagon, 1” star, 1” triangle and 1 1/4” oval, all solid. Requires Die Mask 925DM, which is included with die. The 4" extruder dies are made of 1/2" HDPE...

North Star Expansion Box

INCLUDES: The expansion box, die retainer ring and mounting bolts, hex wrench, three piece spacer board and hardware. The Expansion Box is an extruder accessory that allows the user to produce larger...

21 Ironstar Bat

Non-Warping Water Proof Extremely Strong Wood product without formaldehyde, 3/8 inch thick. Handles clay like wood or Forever. Water proof, no warping, extremely strong. Will not degrade like...